User's Manual
Table Of Contents
- 1 Overview
- 2 Appendix Table
- 3 Introduction to the User
- 4 Basic Function
- 5 Advance Function
- 6 Phone Settings
- 7 Web Configurations
- 8 Network >> Basic
- 8.1 Network >> Service Port
- 8.2 Network >> VPN
- 8.3 Network >> Advanced
- 8.4 Line >> SIP
- 8.5 Line >> SIP Hotspot
- 8.6 Line >> Dial Plan
- 8.7 Line >> Basic Settings
- 8.8 Phone settings >> Features
- 8.9 Phone settings >> Media Settings
- 8.10 Phone settings >> MCAST
- 8.11 Phone settings >> Action
- 8.12 Phone settings >> Time/Date
- 8.13 Phone settings >> Tone
- 8.14 Phone settings >> Advanced
- 8.15 Phonebook >> Contact
- 8.16 Phonebook >> Cloud phonebook
- 8.17 Phonebook >> Call List
- 8.18 Phonebook >> Web Dial
- 8.19 Phonebook >> Advanced
- 8.20 Call Log
- 8.21 Function Key >> Function Key
- 8.22 Function Key >> Softkey
- 8.23 Function Key >> Advanced
- 8.24 Application >> Manage Recording
- 8.25 Security >> Web Filter
- 8.26 Security >> Trust Certificates
- 8.27 Security >> Device Certificates
- 8.28 Security >> Firewall
- 8.29 Device Log >> Device Log
- 9 Trouble Shooting
49 / 122
the conference. Follow the voice prompt to operate.
Note: the upper limit of the number of participants in the network conference varies according to the server.
4.14 Call Park
Call park requires server support. Consult your system administrator for support.
When you are on the call, if it is not convenient to answer the phone at this time, you can press the configured
park button to hold the call; After a successful park, you can resume the call by pressing the configured park
button on other devices.
Set the call park button:
Phone interface: long press a function key to enter the function key Settings interface, or through the
[Menu] >> [Basic Settings] >> [Keyboard Settings] enter the settings interface of function keys, and
set the key function type as memory and subtypes as call park, reside values for the server calls park
number, set up corresponding SIP lines.
WEB interface: log in the phone page, enter the [Function Key] >> [Function Key] page, select a DSSkey,
set the function key type as memory key, the subtype as call park, and the value as the call park number
of the server, and set the corresponding SIP line.
Picture 49 - Phone set call park
Picture 50 - WEB set call park