User's Manual

Table Of Contents
43 / 122
Picture 33 - DND Settings
The user turns on the DND for a specific route on the web page: Enter [Line] >> [SIP], select a [Line] >>
[Basic settings], and enable DND.
Picture 34 - Line DND
4.10 Call Forward
Call forward is also known as ‘Call Divert’ which is to divert the incoming call to a specific number based on
the conditions and configurations. User can configure the call forward settings of each line.
There are three types.
Unconditional Call Forward Forward any incoming call to the configured number.
Call Forward on Busy When user is busy, the incoming call will be forwarded to the configured
number.
Call Forward on No Answer When user does not answer the incoming call after the configured delay
time, the incoming call will be forwarded to the configured number.
Phone interface: Default standby mode
1) Press [Menu] >> [Features] >> [Call Forward] button, select the line by up/down navigation key,
press [OK] button to set call forward..