User's Manual

Table Of Contents
33 / 122
The user can conduct line configuration on the interface of the phone or the webpage, and input the
corresponding information at the registered address, registered user name, registered password and SIP user
and registered port respectively, which are provided by the SIP server administrator.
Phone interface: To manually configure a line, the user can press the line key for a long time, or press the
button in the function menu [Menu] >> [Advanced Settings] >> [Accounts] >> [Line n] configuration,
click ok to save the configuration.
NOTICE! User must enter correct PIN code to be able to advanced settings to edit line configuration.
(The default PIN is 123)
The parameters and screens are listed in below pictures.
Picture 11 - Phone line SIP address and account information
WEB interface: After logging into the phone page, enter [Line] >> [SIP] and select SIP for configuration,
click apply to complete registration after configuration, as shown below:
Picture 12 - Web SIP registration