User's Manual
Table Of Contents
- 1 Overview
- 2 Appendix Table
- 3 Introduction to the User
- 4 Basic Function
- 5 Advance Function
- 6 Phone Settings
- 7 Web Configurations
- 8 Network >> Basic
- 8.1 Network >> Service Port
- 8.2 Network >> VPN
- 8.3 Network >> Advanced
- 8.4 Line >> SIP
- 8.5 Line >> SIP Hotspot
- 8.6 Line >> Dial Plan
- 8.7 Line >> Basic Settings
- 8.8 Phone settings >> Features
- 8.9 Phone settings >> Media Settings
- 8.10 Phone settings >> MCAST
- 8.11 Phone settings >> Action
- 8.12 Phone settings >> Time/Date
- 8.13 Phone settings >> Tone
- 8.14 Phone settings >> Advanced
- 8.15 Phonebook >> Contact
- 8.16 Phonebook >> Cloud phonebook
- 8.17 Phonebook >> Call List
- 8.18 Phonebook >> Web Dial
- 8.19 Phonebook >> Advanced
- 8.20 Call Log
- 8.21 Function Key >> Function Key
- 8.22 Function Key >> Softkey
- 8.23 Function Key >> Advanced
- 8.24 Application >> Manage Recording
- 8.25 Security >> Web Filter
- 8.26 Security >> Trust Certificates
- 8.27 Security >> Device Certificates
- 8.28 Security >> Firewall
- 8.29 Device Log >> Device Log
- 9 Trouble Shooting
30 / 122
3.4 Phone Status
The phone status includes the following information about the phone:
Network Status:
VLAN ID
IPv4 or IPv6 status
IP Address
Network Mode
The Phone Device Information:
Mac Address
Phone Mode
Hardware Version number
Software Version number
Phone Storage (RAM and ROM)
System Running Time
SIP Account Information:
SIP Account
SIP Account Status (register / uncommitted / trying / time out)
TR069 Connect Status (Displays only in the phone interface state)
The user can view the phone status through the phone interface and the web interface.
Phone interface: When the phone is in standby mode, press 【Menu】 >> 【Status】 and select the
option to view the corresponding information, as shown in the figure:
Picture 8 - The Phone status
WEB interface: Refer to 7.5 Web management to log in the phone page, enter the 【System】 >>
【Information】 page, and check the phone status, as shown in the figure: