User's Manual

Table Of Contents
Copyright
Copyright (C) 2021 PLANET Technology Corp. All rights reserved.
The products and programs described in this User’s Manual are licensed products of PLANET Technology. This User’s Manual
contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and
documentation are copyrighted.
No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or
machine-readable form by any means by electronic or mechanical including photocopying, recording, or information storage and
retrieval systems, for any purpose other than the purchaser's personal use, and without the prior written permission of PLANET
Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no
warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for
a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or
omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of
PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET makes
no commitment to update or keep current the information in this User’s Manual, and reserves the right to make improvements
to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.
If User finds information in this manual that is incorrect, misleading, or incomplete, we would appreciate User comments and
suggestions.
CE Mark Warning
This is a class B device. In a domestic environment, this product may cause radio interference, in which case the user may be
required to take adequate measures.
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy saving, please remove the DC-plug or push
the hardware Power Switch to OFF position to disconnect the device from the power circuit.