User's Manual

108 / 122
Name Listened multicast server name
Host: port Listened multicast server’s multicast IP address and port.
8.11 Phone settings >> Action
Action URL
Note! Action urls are used for IPPBX systems to submit phone events. Please refer to manufacturer
Action URL for details.
8.12 Phone settings >> Time/Date
The user can configure the time Settings of the phone on this page.
Table 26 - Time&Date settings
Parameters Description
Network Time Server Settings
Time Synchronized via SNTP Enable time-sync through SNTP protocol
Time Synchronized via DHCP Enable time-sync through DHCP protocol
Primary Time Server Set primary time server address
Secondary Time Server
Set secondary time server address, when primary server is not
reachable, the device will try to connect to secondary time server to get
time synchronization.
Time Zone
Select the time zone
Resync Period Time of re-synchronization with time server
12-Hour Clock Set the time display in 12-hour mode
Date Format Select the time/date display format
Daylight Saving Time Settings
Local
Choose your local, phone will set daylight saving time automatically
based on the local
DST Set Type
Choose DST Set Type, if Manual, you need to set the start time and
end time.
Fixed Type
Daylight saving time rules are based on specific dates or relative rule
dates for conversion. Display in read-only mode in automatic mode.
Offset
The offset minutes when DST started
Month Start The DST start month
Week Start The DST start week
Weekday Start The DST start weekday
Hour Start
The DST start hour