User's Manual

106 / 122
message, including off/on/slow flash/quick flash, default slow flash.
Missed
The state of the power lamp when there is a missed call, including
off/on/slow flash/quick flash, the default slow flash.
Talk/Dial
In the talk/dial state, the power lamp state, off is off, on is always red bright,
the default is off.
Ringing
Power lamp status when there is an incoming call, including off/on/slow
flash/quick flash, default flash.
Mute
Power lamp status in mute mode, including off/on/slow flash/quick flash, off
by default.
Hold/Held
The power lamp state, including off/on/slow flash/quick flash, is turned off by
default when left/retained.
Notification Popups
Display Missed Call Popup
No incoming call popup prompt after opening, no popup prompt when
closing, open by default.
Display MWI Popup
Voice message popup prompt is not answered after opening, and it is
opened by default if there is no popup prompt when closing.
Display Device Connect
Popup
There is a popup prompt when the WIFI adapter is connected. There is no
popup prompt when the WIFI adapter is closed. It is on by default.
Display SMS Popup
There is popup prompt for unread messages after opening, and there is no
popup prompt when closing. It is opened by default.
Display Other Popup
When the handle is not hung back after opening, registration fails, IP
acquisition fails, Tr069 connection fails and other abnormalities, there will be
popup prompt when it is opened; otherwise, there will be no prompt when it
is closed, and it will be opened by default.
8.9 Phone settings >> Media Settings
Change voice Settings.
Table 24 - Voice settings
Parameters Description
Codecs Settings
Select enable or disable voice encoding:
G.711A/U, G.722, G.729, G.726-16, G726-24, G726-32, G.726-40, ILBC,
Opus
Audio Settings
Handset Volume Set the Handset volume, the value must be 1~9
Default Ring Type
Configure default ringtones. If no special ringtone is set for the phone
number, the default ringtone will be used.