User's Manual
Table Of Contents
- 1 Overview
- 2 Appendix Table
- 3 Introduction to the User
- 4 Basic Function
- 5 Advance Function
- 6 Phone Settings
- 7 Web Configurations
- 8 Network >> Basic
- 8.1 Network >> Service Port
- 8.2 Network >> VPN
- 8.3 Network >> Advanced
- 8.4 Line >> SIP
- 8.5 Line >> SIP Hotspot
- 8.6 Line >> Dial Plan
- 8.7 Line >> Basic Settings
- 8.8 Phone settings >> Features
- 8.9 Phone settings >> Media Settings
- 8.10 Phone settings >> MCAST
- 8.11 Phone settings >> Action
- 8.12 Phone settings >> Time/Date
- 8.13 Phone settings >> Tone
- 8.14 Phone settings >> Advanced
- 8.15 Phonebook >> Contact
- 8.16 Phonebook >> Cloud phonebook
- 8.17 Phonebook >> Call List
- 8.18 Phonebook >> Web Dial
- 8.19 Phonebook >> Advanced
- 8.20 Call Log
- 8.21 Function Key >> Function Key
- 8.22 Function Key >> Softkey
- 8.23 Function Key >> Advanced
- 8.24 Application >> Manage Recording
- 8.25 Security >> Web Filter
- 8.26 Security >> Trust Certificates
- 8.27 Security >> Device Certificates
- 8.28 Security >> Firewall
- 8.29 Device Log >> Device Log
- 9 Trouble Shooting
103 / 122
Server Address Set the STUN server address
Server Port Set the STUN server port, default is 3478
Binding Period
Set the STUN binding period which can be used to keep the NAT pinhole
opened.
SIP Waiting Time
Set the timeout of STUN binding before sending SIP messages
The TLS authentication
TLS Certification File Upload or delete the TLS certification file used for encrypted SIP transmission.
8.8 Phone settings >> Features
Configuration phone features.
Table 23 - General function Settings
Parameters Description
Basic Settings
Enable Call Waiting
Enable this setting to allow user to take second incoming call during an
established call. Default enabled.
Enable Call Transfer
Enable Call Transfer.
Semi-Attended Transfer Enable Semi-Attended Transfer by selecting it
Enable 3-Way Conference
Enable 3-way conference by selecting it
Enable Auto Onhook
The phone will hang up and return to the idle automatically at hands-free
mode
Auto Onhook Time
Specify Auto Onhook time, the phone will hang up and return to the idle
automatically after Auto Hand down time at hands-free mode, and play dial
tone Auto Onhook time at handset mode
Ring for Headset
Enable Ring for Handset by selecting it, the phone plays ring tone from
handset.
Auto Headset
Enable this feature, headset plugged in the phone, user press ‘answer’ key
or line key to answer a call with the headset automatically.
Enable Silent Mode
When enabled, the phone is muted, there is no ringing when calls, you can
use the volume keys and mute key to unmute.
Disable Mute for Ring
When it is enabled, you can’t mute the phone
Enable Default Line If enabled, user can assign default SIP line for dialing out rather than SIP1.
Enable Auto Switch Line Enable phone to select an available SIP line as default automatically
Default Ext Line Select the default line to use for outgoing calls
Ban Outgoing If you select Ban Outgoing to enable it, and you cannot dial out any number.
Hide DTMF Configure the hide DTMF mode.
Enable CallLog
Select whether to save the call log.