User's Manual
Table Of Contents
- 1 Overview
- 2 Appendix Table
- 3 Introduction to the User
- 4 Basic Function
- 5 Advance Function
- 6 Phone Settings
- 7 Web Configurations
- 8 Network >> Basic
- 8.1 Network >> Service Port
- 8.2 Network >> VPN
- 8.3 Network >> Advanced
- 8.4 Line >> SIP
- 8.5 Line >> SIP Hotspot
- 8.6 Line >> Dial Plan
- 8.7 Line >> Basic Settings
- 8.8 Phone settings >> Features
- 8.9 Phone settings >> Media Settings
- 8.10 Phone settings >> MCAST
- 8.11 Phone settings >> Action
- 8.12 Phone settings >> Time/Date
- 8.13 Phone settings >> Tone
- 8.14 Phone settings >> Advanced
- 8.15 Phonebook >> Contact
- 8.16 Phonebook >> Cloud phonebook
- 8.17 Phonebook >> Call List
- 8.18 Phonebook >> Web Dial
- 8.19 Phonebook >> Advanced
- 8.20 Call Log
- 8.21 Function Key >> Function Key
- 8.22 Function Key >> Softkey
- 8.23 Function Key >> Advanced
- 8.24 Application >> Manage Recording
- 8.25 Security >> Web Filter
- 8.26 Security >> Trust Certificates
- 8.27 Security >> Device Certificates
- 8.28 Security >> Firewall
- 8.29 Device Log >> Device Log
- 9 Trouble Shooting
99 / 122
Enable user=phone Sets user=phone in SIP messages.
Use Tel Call Set use tel call
Auto TCP
Using TCP protocol to guarantee usability of transport for SIP messages
above 1500 bytes
Enable Rport
Set the line to add rport in SIP headers
Enable PRACK Set the line to support PRACK SIP message
DNS Mode Select DNS mode, A, SRV, NAPTR
Enable Long Contact Allow more parameters in contact field per RFC 3840
Enable Strict Proxy
Enables the use of strict routing. When the phone receives packets from the
server，it will use the source IP address, not the address in via field.
Convert URI
Convert not digit and alphabet characters to %hh hex code
Use Quote in Display
Name
Whether to add quote in display name.
Enable GRUU
Support Globally Routable User-Agent URI (GRUU)
Sync Clock Time Time Sync with server
Enable Inactive Hold
With the post-call hold capture package enabled, you can see that in the
INVITE package, SDP is inactive.
Caller ID Header
Set the Caller ID Header
Use 182 Response for
Call waiting
Set the device to use 182 response code at call waiting response
Enable Feature Sync
Feature Sync with server
Enable SCA Enable/Disable SCA (Shared Call Appearance )
CallPark Number Set the CallPark number.
Server Expire Set the timeout to use the server.
TLS Version Choose TLS Version.
uaCSTA Number
Set uaCSTA Number.
Enable Click To Talk With the use of special server, click to call out directly after enabling.
Flash mode
Chose Flash mode，normal or SIP info.
Flash Info Content-Type
Set the SIP info content type.
Flash Info Content-Body Set the SIP info content body.
PickUp Number Set the scramble number when the Pickup is enabled.
JoinCall Number
Set JoinCall Number.
Intercom Number Set Intercom Number.
Unregister On Boot Whether to enable logout function.
Enable MAC Header When opening the registration, are IP package and user agent with MAC.
Enable Register MAC
Header
When opening the registration, is user agent with MAC.