Quick Guide

– 1 – – 2 –
– 3 – – 4 –
Verify The Contents Inside
The Package Box
The package should contain the following items plus VIP-1260PT.
If any item is missing or damaged, please contact the seller
immediately.
VIP-1260PT Quick Installation Guide
Handset Handset Cord
Stand RJ45 Cable
Step 1. Tilted Stand Installation
Take the stand and hook it on the back of the phone. There are two
angles for your selection.
Step 2. Connecting to the Device
Please connect PoE network, PC and handset to the corresponding
ports as described in the diagram below.
DC 5V Internet PC Headset
Handset
Index Description
1
Power port: External standard power supply (5V DC,
2A, optional)
2
Internet port: Connect to the Internet
(Only Internet port supports PoE. Connect to an IEEE
802.3af/at PSE device such as 802.3af injector / hub or
802.3af/at PoE switch.)
3 PC port: Connect to the computer
4 Headset port: External RJ9 earphone (optional)
5 Handset port: Connect to IP phone handset
Note
1. The VIP-1260PT also supports IEEE 802.3af/at. Be
reminded to power either from AC adapter or PoE
switch.
2. The AC adapter is not included.