User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface & Installa
- Chapter 3. Introduction to the Phone Use
- Chapter 4. IP Phone Setup
- Chapter 5. Using the Phone
- 5.1 Making Phone Calls
- 5.2 Make/Receive Second Call
- 5.3 Join/Split Two Calls (3-way Local Co
- 5.4 Call Transfer
- 5.5 Using Phonebook
- 5.6 Add/Edit/Delete Contact
- 5.7 Add/Edit/Delete Group
- 5.8 Browse and Add/Remove Contacts in Gr
- 5.9 Using Cloud Phonebook
- 5.10 Open Cloud Phonebook
- 5.11 Call Logs
- 5.12 Voice Message
- 5.13 Do-Not-Disturb
- 5.14 Auto-Answering
- 5.15 Call Forward
- Chapter 6. Phone Settings
- Chapter 7. Web Portal
- 7.1 Web Portal Authentication
- 7.2 Web Call
- 7.3 SYSTEM (Information)
- 7.4 SYSTEM (Account)
- 7.5 SYSTEM (Configurations)
- 7.6 SYSTEM (Upgrade)
- 7.7 SYSTEM (Auto Provision)
- 7.8 SYSTEM (Tools)
- 7.9 NETWORK (Basic)
- 7.10 NETWORK (Advanced)
- 7.11 NETWORK (VPN)
- 7.12 LINES (SIP)
- 7.13 LINES (Dial Peer)
- 7.14 LINES (Dial Plan)
- 7.15 LINES (Global Settings)
- 7.16 PHONE (Features)
- 7.17 PHONE (Audio)
- 7.18 PHONE (MCAST)
- 7.19 PHONE (Time/Date)
- 7.20 PHONE (Advanced)
- 7.21 PHONEBOOK (Contacts)
- 7.22 PHONEBOOK (Cloud Phonebook)
- 7.23 PHONEBOOK (Blacklist)
- 7.24 PHONEBOOK (Advanced)
- 7.25 CALL LOGS
- 7.26 FUNCTION KEY
- 7.27 FUNCTION KEY (Softkey)
- Chapter 8. Advanced Features
- Chapter 9. Troubleshooting
- Appendix I - Icon Illustration
- Appendix II - Text Input from Keypad
- Appendix III - LED Definition
Parameters Description
taking; default enabled.
Play Dialing DTMF Tone
Play DTMF tone on the device when user presses a phone digits at
dialing; default enabled.
Caller ID Display Priority
Change caller ID display priority. The default priority is “Phonebook” >
“SIP Display Name” > “SIP URI”. User may select one of the options to
change the desired caller ID display priority.
Display Num With Name
Allow user to determine the caller-id display method.
If it is checked, the caller-id will display number with name.
If the value is unchecked, the caller-id will abide by CID Priority..
Action URL
Action URL is used for device event submitting with IPPBX system. The detail is addressed
in the “VIP-1120PT Administration Guide”.
Restrict Outgoing Call
The user with Administrators privilege can set the rule to restrict some numbers from dialing out. This
setting is device-wide and applies to every user of the device.
User can add restricted number by entering the number in the edit box and click the “Add” button. To
remove a number from the restriction list, select the number from the dropdown box and click the
“Delete” button to remove it.
7.17 PHONE (Audio)
Change the audio settings:
Table 8 - Audio Settings on Web
Parameters Description
First Codec
The first preferential DSP
codec:G.711A/U,G.722,G.723,G.729,G.726-32,
ILBC,AMR,AMR-WB
Second Codec
The second preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,
ILBC,AMR,AMR-WB,NONE
Third Codec The third preferential DSP codec:
77