User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface & Installa
- Chapter 3. Introduction to the Phone Use
- Chapter 4. IP Phone Setup
- Chapter 5. Using the Phone
- 5.1 Making Phone Calls
- 5.2 Make/Receive Second Call
- 5.3 Join/Split Two Calls (3-way Local Co
- 5.4 Call Transfer
- 5.5 Using Phonebook
- 5.6 Add/Edit/Delete Contact
- 5.7 Add/Edit/Delete Group
- 5.8 Browse and Add/Remove Contacts in Gr
- 5.9 Using Cloud Phonebook
- 5.10 Open Cloud Phonebook
- 5.11 Call Logs
- 5.12 Voice Message
- 5.13 Do-Not-Disturb
- 5.14 Auto-Answering
- 5.15 Call Forward
- Chapter 6. Phone Settings
- Chapter 7. Web Portal
- 7.1 Web Portal Authentication
- 7.2 Web Call
- 7.3 SYSTEM (Information)
- 7.4 SYSTEM (Account)
- 7.5 SYSTEM (Configurations)
- 7.6 SYSTEM (Upgrade)
- 7.7 SYSTEM (Auto Provision)
- 7.8 SYSTEM (Tools)
- 7.9 NETWORK (Basic)
- 7.10 NETWORK (Advanced)
- 7.11 NETWORK (VPN)
- 7.12 LINES (SIP)
- 7.13 LINES (Dial Peer)
- 7.14 LINES (Dial Plan)
- 7.15 LINES (Global Settings)
- 7.16 PHONE (Features)
- 7.17 PHONE (Audio)
- 7.18 PHONE (MCAST)
- 7.19 PHONE (Time/Date)
- 7.20 PHONE (Advanced)
- 7.21 PHONEBOOK (Contacts)
- 7.22 PHONEBOOK (Cloud Phonebook)
- 7.23 PHONEBOOK (Blacklist)
- 7.24 PHONEBOOK (Advanced)
- 7.25 CALL LOGS
- 7.26 FUNCTION KEY
- 7.27 FUNCTION KEY (Softkey)
- Chapter 8. Advanced Features
- Chapter 9. Troubleshooting
- Appendix I - Icon Illustration
- Appendix II - Text Input from Keypad
- Appendix III - LED Definition
7.16 PHONE (Features)
Configure the phone features and common Settings:
Table 7 - Common Phone Feature Settings on Web
Parameters Description
Enable Phone DND
Configure the Phone DND.
If enable Phone DND, the phone rejects any incoming call; the caller
will automatically be prompted to hang up.
Ban Outgoing
If you select Ban Outgoing and enable it, and you cannot dial out any
number.
Enable Call Transfer Enable Call Transfer by selecting it.
Semi-Attended Transfer Enable Semi-Attended Transfer by selecting it.
Enable 3-Way Conference Enable 3-way conference by selecting it.
Enable Auto Hand Down
The phone will hang up and return to the idle automatically in
hands-free mode.
Auto Hand Down Time
Specify Auto hand down time, the phone will hang up and return to the
idle automatically after Auto Hand down time in hands-free mode, and
play dial tone Auto hand down time in handset mode.
Enable Auto Redial
Enable Auto Redial by selecting it, then the phone reminds whether
redial, when the dialed line is busy or rejects.
Auto Redial Interval Configure the Auto redial interval.
Auto Redial Times Configure the Auto redial times.
Enable Call Waiting
Enable this setting to allow user to take second incoming call during an
established call. Default enabled.
Enable Call Waiting Tone
Turn off this feature, and you will not hear a ‘beep’ sound in talking
mode when there is another incoming call.
Enable Call Completion
Enable Call Completion by selecting it; if the dialed line is busy, the sip
server will inspect the dialed line status at intervals. If the dialed line is
idle, the server will send notification message to inform the caller
whether to redial.
Enable Pre-Dial
To disable this feature, enter the number to open audio channel
automatically.
To enable the feature, enter the number without opening audio channel.
Hide DTMF Configure the hide DTMF mode.
Auto Headset
Enable this feature; headset is plugged in the phone. User presses
‘answer’ key or line key to answer a call with the headset automatically.
75