User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface & Installa
- Chapter 3. Introduction to the Phone Use
- Chapter 4. IP Phone Setup
- Chapter 5. Using the Phone
- 5.1 Making Phone Calls
- 5.2 Make/Receive Second Call
- 5.3 Join/Split Two Calls (3-way Local Co
- 5.4 Call Transfer
- 5.5 Using Phonebook
- 5.6 Add/Edit/Delete Contact
- 5.7 Add/Edit/Delete Group
- 5.8 Browse and Add/Remove Contacts in Gr
- 5.9 Using Cloud Phonebook
- 5.10 Open Cloud Phonebook
- 5.11 Call Logs
- 5.12 Voice Message
- 5.13 Do-Not-Disturb
- 5.14 Auto-Answering
- 5.15 Call Forward
- Chapter 6. Phone Settings
- Chapter 7. Web Portal
- 7.1 Web Portal Authentication
- 7.2 Web Call
- 7.3 SYSTEM (Information)
- 7.4 SYSTEM (Account)
- 7.5 SYSTEM (Configurations)
- 7.6 SYSTEM (Upgrade)
- 7.7 SYSTEM (Auto Provision)
- 7.8 SYSTEM (Tools)
- 7.9 NETWORK (Basic)
- 7.10 NETWORK (Advanced)
- 7.11 NETWORK (VPN)
- 7.12 LINES (SIP)
- 7.13 LINES (Dial Peer)
- 7.14 LINES (Dial Plan)
- 7.15 LINES (Global Settings)
- 7.16 PHONE (Features)
- 7.17 PHONE (Audio)
- 7.18 PHONE (MCAST)
- 7.19 PHONE (Time/Date)
- 7.20 PHONE (Advanced)
- 7.21 PHONEBOOK (Contacts)
- 7.22 PHONEBOOK (Cloud Phonebook)
- 7.23 PHONEBOOK (Blacklist)
- 7.24 PHONEBOOK (Advanced)
- 7.25 CALL LOGS
- 7.26 FUNCTION KEY
- 7.27 FUNCTION KEY (Softkey)
- Chapter 8. Advanced Features
- Chapter 9. Troubleshooting
- Appendix I - Icon Illustration
- Appendix II - Text Input from Keypad
- Appendix III - LED Definition
The device supports 7 dialing modes:
Press # to Send -- Dial the desired number, and press # to send it to the server.
Dial Fixed Length -- Configure the fixed length to dial out
Send after seconds -- Number will be sent to the server after the specified time.
Press # to Do Blind Transfer -- Press # after entering the target number for the transfer. The phone
will transfer the current call to the third party.
Blind Transfer on Onhook -- Hang up after entering the target number for the transfer. The phone
will transfer the current call to the third party.
Attended Transfer on Onhook -- Hang up after the third party answers. The phone will transfer the
current call to the third party.
Attended Transfer on Conference Onhook -- Hang up during a 3-way conference call, the other
two ways will make a call.
Press DSS Key to Do Blind Transfer -- When user is in the ‘XFER’ screen, user can fulfill Blind
Transfer by pressing the DSS key.
7.15 LINES (Global Settings)
Configure global settings for lines,
Table 6 - Global Settings for Lines on Web
Parameters Description
SIP Settings
Local SIP Port
Set the local SIP port used to send/receive SIP
messages.
Registration Failure Retry Interval
Set the retry interval of SIP REGISTRATION when
registration failed.
STUN Settings
Server Address Set the STUN server address.
Server Port Set the STUN server port; default is 3478.
Binding Period
Set the STUN binding period which can be used to
keep the NAT pinhole open.
SIP Waiting Time
Set the timeout of STUN binding before sending
SIP messages.
TLS Certification File
Upload or delete the TLS certification file used for
encrypted SIP transmission.
74