User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Interface & Installa
- Chapter 3. Introduction to the Phone Use
- Chapter 4. IP Phone Setup
- Chapter 5. Using the Phone
- 5.1 Making Phone Calls
- 5.2 Make/Receive Second Call
- 5.3 Join/Split Two Calls (3-way Local Co
- 5.4 Call Transfer
- 5.5 Using Phonebook
- 5.6 Add/Edit/Delete Contact
- 5.7 Add/Edit/Delete Group
- 5.8 Browse and Add/Remove Contacts in Gr
- 5.9 Using Cloud Phonebook
- 5.10 Open Cloud Phonebook
- 5.11 Call Logs
- 5.12 Voice Message
- 5.13 Do-Not-Disturb
- 5.14 Auto-Answering
- 5.15 Call Forward
- Chapter 6. Phone Settings
- Chapter 7. Web Portal
- 7.1 Web Portal Authentication
- 7.2 Web Call
- 7.3 SYSTEM (Information)
- 7.4 SYSTEM (Account)
- 7.5 SYSTEM (Configurations)
- 7.6 SYSTEM (Upgrade)
- 7.7 SYSTEM (Auto Provision)
- 7.8 SYSTEM (Tools)
- 7.9 NETWORK (Basic)
- 7.10 NETWORK (Advanced)
- 7.11 NETWORK (VPN)
- 7.12 LINES (SIP)
- 7.13 LINES (Dial Peer)
- 7.14 LINES (Dial Plan)
- 7.15 LINES (Global Settings)
- 7.16 PHONE (Features)
- 7.17 PHONE (Audio)
- 7.18 PHONE (MCAST)
- 7.19 PHONE (Time/Date)
- 7.20 PHONE (Advanced)
- 7.21 PHONEBOOK (Contacts)
- 7.22 PHONEBOOK (Cloud Phonebook)
- 7.23 PHONEBOOK (Blacklist)
- 7.24 PHONEBOOK (Advanced)
- 7.25 CALL LOGS
- 7.26 FUNCTION KEY
- 7.27 FUNCTION KEY (Softkey)
- Chapter 8. Advanced Features
- Chapter 9. Troubleshooting
- Appendix I - Icon Illustration
- Appendix II - Text Input from Keypad
- Appendix III - LED Definition
Parameters Description
YYYY-MM-DD
Date (Only Mode = Manual) Edit the date of the device in the format of yyyy/mm/dd.
Time (Only Mode = Manual)
Edit the time of the device in the format of hh:mm:ss.
Hh=00~23, mm=00~59, ss=00~59
6.5 Set Device Language
When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Settings] item.
Enter [Settings] item till you find the [Basic Settings] item.
Enter [Basic Settings] item till you find [Language] item.
User can change the language by using the navigation keys.
6.6 Reboot the Device
When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Reboot System] item.
Press the [OK] or [Enter] button, a warning message “Reboot Now?” will be prompt to user.
Press the [Yes] or [OK] button to execute the reset command, or [No] to exit.
6.7 Reset to Factory Default
When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Settings] item, and press [OK] or [Enter] button.
Enter [Advanced Settings] item, then input the device PIN (Default PIN is 123) to enter the
interface.
Enter [Reset to Default] item, then a warning message “Factory Reset, Continues?” will be prompt
to user.
Press the [Yes] or [OK] button to execute the reset command, or [No] to exit.
59