User's Manual

Figure 39 - Second Incoming Call Screen
 Second Outgoing Call
To make a second call, user may press the [XFER] / [Conf] button to make a new call on the default line
or press the line key to make new call on a specific line. Then dial the number the same way as making
a phone call. Another alternative for making second call is to press the DSS Keys dialing out from the
configured Keys (BLF/Speed Dial). When user is making a second call with the above methods, the
first call could be placed on hold manually first or will be put on hold automatically at the second dial.
 Switching between Two Calls
When there are two calls established, user will see a dual call screen as shown in the following picture.
Figure 40 - Dual Calls
User can press the up/down navigation button to switch screen page, and switch call focus by pressing
the [Hold] / [Resume] button.
41