User's Manual

Figure 38 - Call Holding Screen
 Call Ended
When user finishes the call, user can put the handset back to the device to hang up the call or press the
hands-free button to close the audio channel to hang up.
When the call is held or in holding state, the user must press the [Resume] button to return to
call mode, or putting the handset back to the device or pressing the speaker-free button to
hang up is not available.
5.2 Make/Receive Second Call
The device can support up to two concurrent calls. When there is already a call established, user can
still answer another incoming call on either lines or make a second call on either lines.
 Second Incoming Call
When there is another incoming call during talking a phone call, this call will be waiting for user to
answer it. User will see the call message in the middle of the current screen. The device will not be
ringing but playing call waiting tone in the audio channel of the current call and the LED will be flashing
in green. User can accept or reject the call which is the same as normal incoming call. When the
waiting call is answered, the first call will be put on hold automatically.
40