User's Manual

Chapter 5. Using the Phone
5.1 Making Phone Calls
 Default Line
The device provides 2 line services. If both lines are configured, user can make or receive phone calls
on either line. If default line is configured by user, there will be a default line to be used for making
outgoing call which is indicated on the top left corner. To change the default line, user can press the
left/right navigation button to switch between two lines. To enable or disable default line, user can press
[menu] - > [Features] -> [Default Line] or configure from Web Interface (Web/PHONE
Settings/Features).
Figure 32 - Default Line
 Dialing Methods
User can dial a number by,
 Entering the number directly
 Selecting a phone number from phonebook contacts (Refer to 5.5 Using Phonebook)
 Selecting a phone number from cloud phonebook contacts (Refer to 5.9 Using Cloud
Phonebook)
 Selecting a phone number from call logs (Refer to 5.11 Call Logs)
 Redialing the last dialed number
36