User's Manual
Table Of Contents
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1. Overview
- Chapter 2. Auto-Provisioning – For massive deployment of phones
- Chapter 3. Quality of Service (QoS) – Enhance the communication quality
- Chapter 4. Action URL and Active URI – Collaborative working environment through Computer Telephony Integration (CTI)
- Chapter 5. Active URI
- Chapter 6. Traversing NAT
39
public network. In addition, the value of ‘rport’ parameter is equalled to port from public IP address. SIP
server will keep client device’s NAT mapping IP and port information and send request via the field. This
method would not need 3-party server to find NAT mapping information, and have been supported in many
types of SIP server. So the default configuration value of Rport in X series phone is 1 (enabled).
Configuration method:
1. configuration by web user interface
1) Click ‘Line/SIP/Advanced Settings’ when you want to configure Rport setting for Line1
2) Make sure checkbox of ‘Enable Rport’ is checked when you want Rport to be active.
3) Click the ‘Apply’ button to save the changes.
2. Items in configuration file
Parameters Descriptions
SIP1 Enable Rport Configure Line 1 enables Rport feature or not. 0 is
Disabled, 1 is Enabled. Default is 1.