User's Manual
Table Of Contents
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1.
- Chapter 1. Overview
- Chapter 2. Auto-Provisioning – For massive deployment of phones
- Chapter 3. Quality of Service (QoS) – Enhance the communication quality
- Chapter 4. Action URL and Active URI – Collaborative working environment through Computer Telephony Integration (CTI)
- Chapter 5. Active URI
- Chapter 6. Traversing NAT
12
3. Click the Confirm button to finish configuring the TFTP server.
The server URL “tftp://IP/” (Here “IP” means the IP address of the provisioning server, for
example, “tftp://10.0.0.3/”) is where the IP phone downloads configuration files from.
2.3.2 Configure an FTP server
If there is a wftpd application installed on your PC, open it now, or otherwise, download and install it.
To configure an FTP server:
1. Double-click the wftpd.exe to open the application.
2. A screenshot is shown below:
3. Select Security, then click User/right
4. Click New User,