User's Manual
Table Of Contents
- Preface
- 1 Introduction of VGW-X20FS SERIES
- 2 Basic Operations
- 3 Configurations on Web Interface
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
69
3.14 Tools
3.14.1 Firmware upload
Firmware upload steps:
Step 1.
Check the current firmware version on the System Information page
Figure 3.16-1 Firmware Version
Step 2.
Prepare firmware package. The most important is that the package must match with the existing version.
Package version consists of the following parts:
1.18.xx.xx
01/02 is vendor name
18 is hardware version, xx.xx is version number
Step 3.
Upload firmware, select the package from specific folder on the computer and click the Upload button.
Figure 3.16-2 Firmware Upload
Step 4.
Keep waiting until it prompts ‘Software loaded successfully!’
Figure 3.16-3 Successful Firmware Upload