User's Manual
Table Of Contents
- Preface
- 1 Introduction of VGW-X20FS SERIES
- 2 Basic Operations
- 3 Configurations on Web Interface
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
59
3.11.3 Route any calls from any port to specific SIP IP trunk
Create IP Trunk on the Call & Routing
IP Trunk interface:
After IP Trunk is created, check the following configuration:
As shown above, the IP trunk is created, and the remote end IP address is 172.16.125.125, the SIP port
is 5060.
Create Tel -> IP routing rule
On the Call & Routing
Tel-IP Routing interface, click “Add” to create a new Tel IP routing rule.