User's Manual
Table Of Contents
- Preface
- 1 Introduction of VGW-X20FS SERIES
- 2 Basic Operations
- 3 Configurations on Web Interface
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
52
3.9.6 Tel-IP/Tel Routing
Figure 3.11-6 Configuration Interface for Tel-IP/Tel Routing
Explanation of related parameters:
Index
The index of this Tel IP/Tel routing, from 0 to 127. Each index cannot be used repeatedly. Routing
priority: 0 is the highest priority.
Description It is used to identify the routing
Calls From Tel IP calls are from a port or a port group
Caller Prefix
The prefix of the caller number, which helps match routing exactly. its length is less than or equal to the
caller number. For example, if caller number is 2001, the caller prefix can be 200 or 2. ‘any’ means the
prefix matches any caller number.
Callee Prefix
The prefix of the called number, which helps match routing exactly. Its length is less than or equal to the
called number. If the called number is 008675526456659, the called prefix can be 0086755 or 00.,“any”
means the prefix matches any called number.
Calls to Calls are routed to a port, port group, IP trunk or SIP server