User's Manual
Table Of Contents
- Preface
- 1 Introduction of VGW-X20FS SERIES
- 2 Basic Operations
- 3 Configurations on Web Interface
4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
41
Voicemail instructions:
How the voicemail works in the VGW-X20FS SERIES gateway together with Elastix.
1）After the gateway is registered to Elastix server, enable the voicemail function in Elastix for the
corresponding extension number and then set password shown below：
Elastix Voicemail Configuration Interface
2）Check feature code in Elastix and change it if necessary. Its default feature code setting is as follows:
Elastix Voicemail Setting
On the Web interface of VGW-X20FS SERIES, click Advanced SIP Parameter in the navigation tree
and then enter voicemail User ID.
VoiceMail Setting in SIP Parameter