VGW-Series Quick Guide

– 5 – – 6 –
4. Installation Check
In this step, we should check VGW series when power is on. But
before this, you should ensure that all other things are done (such
as cable connection, and power connection). Then you can refer to
the following steps:
z Keep device power on, and check whether the power indicator
(PWR) is on or not. If so, it indicates that device’s power is
ready, otherwise please check the connection of the power plug
or power adaptor.
z Check Ethernet port (WAN / LAN) LED status. When port LED
is blinking, it indicates that network is ready. Otherwise, check
network connection.
z Check phone port status LED. When device’s (SYS) LED is
blinking at the time you pick up the phone and the phone port
LED is on, it indicates telephone port is ready, otherwise check
the telephone connection.
Further Information
For more information, please refer to the VGW series user manual.
https://www.planet.com.tw/en/support/downloads?&method=keywor
d&keyword=VGW-410&view=3#list
If you have any other question, please contact the dealer where you
purchased this product or you can contact PLANET directly at the
following email address: [e-mail]