User's Manual

4-/8-/16-/24-/32-Port SIP Internet Telephony Gateway
26
Figure 3.7-2 Bridge Mode
If DHCP is selected to obtain IP address, please ensure DHCP server in
the network works normally.
When the gateway works in the route mode, the IP address of LAN port and
that of WAN port cannot be in the same network segment, otherwise the
gateway can’t work normally.
When the gateway works in the route mode, log in the gateway’s web
configuration interface via the LAN port.
After the configurations are finished, please restart
the gateway for the
configurations to take effect.