User Manual

18
(4) VF-101G/102G/106G-R (Receiver): Connect coaxial
cable from monitor/HDVR to Video BNC port of the
VF-101G/102G/106G-R.
(5) Connect the 5V DC power adapter to the
VF-101G/102G/106G-T and VF-101G/102G/106G-R, and
make sure that the power is on and the link LED is lit.
(6) Turn on the power of the analog camera/monitor; the video
LED should be lit when all cables are connected.
VF-101G/102G/106G-T
Transmitter
VF-101G/102G/106G-R
Receiver
Coax
Video
Speed Dome
HDVR / Monitor
Control Keyboard
Up to 20km
Coax
Video
Gigabit Fiber-optic
1000
RS485
RS485
Video Line
Video
RS485
RS485
1000
3.4 Optional Chassis Installation
To install the Video over Fiber Converter in a 10-inch or 19-inch
Converter Chassis with standard rack, follow the instructions
described below.
(1) Place your Converter Chassis on a hard at surface, with
the front panel positioned toward your front side.
(2) Carefully slide in the module until it is fully and rmly tted
into the slot of the Converter Chassis.