Datasheet

VF-10xG-KIT
4
Specications
Model
VF-101G-KIT VF-102G-KIT VF-106G-KIT
Video Characteristics
Video Channel 1 channel bi-direction
Signal Mode NTSC/PAL/SECAM
Video Connector BNC
Supported Video Type
1080p: AHD/TVI/CVI
480p: CVBS
Video Input/Output Impedance 75ohm/unbalanced interface
Video Input/Output Voltage 1.0 Vpp/typical peak-to-peak value
Video Bandwidth 60MHz
Video Digital Bit Width 8/10 bit
Differential Gain (DG) < 1.3% (typical value)
Differential Phase (DP) < 1.3° (typical value)
SNR Weighted > 67dB (typical value)
Data Interface
Data Channel 1 channel
Physical Protocol RS485
Operation Mode Simplex
Data Connector 3
-
pin terminal block with screw clamps
Data Rate DC-115.2Kbps
Data Distance RS485: 0 -1200m
Bit Error Rate (BER) < 10ns
Optical Interface
Optical Connector ST FC WDM-SC
Distance 20km for single mode
Optical Wavelength
VF-101G -T VF-102G-T VF-106G-T
TX: 1310nm, RX: 1550nm TX: 1310nm, RX: 1550nm TX: 1310nm, RX: 1550nm
VF-101G-R VF-102G-R VF-106G-R
TX: 1550nm, RX: 1310nm TX: 1550nm, RX: 1310nm TX: 1550nm, RX: 1310nm
Launch Power (dBm) Max.: 0, Min.: -9
Receive Sensitivity (dBm) -26
Max. Input Power (dBm) -3
Cable 9/125μm single mode cable
Hardware Specications
LED Indicators
• Power
• Video
• Link (ber optic)
Dimensions (W x D x H) 94 x 70 x 26 mm
Weight 200g
Power Requirement 5V DC, 2A
Power Consumption 4.8 watts (maximum)
Mechanical Metal
Installation Wall-mountable, DIN-rail (with optional kit), chassis installation (with optional chassis)
Compatible Converter Chassis MC-700/MC-1500/MC-1500R
Standards Conformance
Regulatory Compliance FCC, CE
Standards Conformance
Operating
Temperature: -25 ~ 75 degrees C
Relative Humidity: 0 ~ 95% (non-condensing)
Storage
Temperature: -30 ~ 80 degrees C
Relative Humidity: 0 ~ 95% (non-condensing)
Standard Accessories
Packet Contents
VF-101G/102G/106G-T x 1
VF-101G/102G/106G-R x 1
User’s manual x 1
5V, 2A power adapter x 2