Datasheet

VC-234
Data Sheet
2
Applications
Ethernet Distance Extension
Two VC-234 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper
wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. The telephone service can still be used
while the VC-234 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Bridge.
MTU / MDU / Hospitality Solution
The VC-234 is a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such as residential buildings
(multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network
installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various
broadband services can be easily provided.
LAN1
LAN2
VC-234/CO VC-234/CPE
Up to 1.4km
Ethernet over VDSL2 and Telephone Network
LAN to LAN Connection
Main office/PBX,
Telco CO,
wire closet
VDSL2
Telephone wire
Telephone wire
100Base-TX UTP
VDSL2
VDSL2
Telephone wire
100Base-TX UTP
VDSL2
VDSL2
UP to 1.4km
VDSL2
LAN2
Router
LAN1
Ethernet over VDSL2 and Telephone Network
Multi-LAN Connection
Main office/PBX,
Telco CO,
wire closet
VDSL2 Switch
(Multi-port CO)
Internet
VDSL2
Telephone wire
VC-234/CPE
VC-234/CPE