(V2) User Manual

 DIP-4: SNR (Signal Noise Ratio) Margin

When the SNR margin is selected, the system provides

12dB/8dB SNR margin for all usable loop lengths. Better

channel noise protection is made with the higher SNR margin.

Note

Please power off the VDSL2 Bridge before

making any transmission mode adjustment.

 DC Power Jack

The VC-232G requires 5V DC, 2A power input, which conforms

to the bundled AC adapter. Should you have the issue of power

connection, please contact your local sales representative.

2.5mm

Width of DC Receptacle: 2.5mm

+5V for each slot

DC receptacle is 2.5mm wide that matches

the central post, measuring 2.5mm wide, of the VDSL2

converter’s DC jack. Do not install any improper unit.

Note

In some areas, installing a surge suppres-

sion device may also help to protect your EoC

Converter from being damaged by unregulated

surge or current to the EoC Converter or the

power adapter.