User's Manual

4. Applications

The EoC Converter does not require any software conguration.

Users can immediately use any feature of this product simply by

attaching the cables and turning the power on. There are some

key limitations on the EoC Converter. Please check the following

items

4.1 Point-to-Point Application -- LAN to LAN

Connection

One set of the EoC Converter could be used to link two local

area networks that are located in different places. Through

the coaxial cable, it could set up a 200/100Mbps asymmetric

backbone, but one EoC Converter must be Master (CO mode)

and the other one is Slave (CPE mode).

VC-232G

(CO)

VC-232G

(CPE)

Up to 1400m

Point to Point Application

Ethernet over Coaxial

Ethernet over VDSL 2 Converter

5V DC adapter

Switch

Connecting Standalone PC

Refer to the following procedures to set up the VC-232G LAN to

LAN connection.

1. [LAN1] Set the VC-232G at LAN 1 to be CO mode from the

DIP switch

2. [LAN2] Set the VC-232G at LAN 2 to be CPE mode from the

DIP switch