User Manual
14
4. Connecting And Using The VDSL2 Bridge
The VC-231GP does not require any software conguration. Users
can immediately use any feature of this product simply by putting
the plug in the receptacle and turning it on. There is some key
limitation on the VC-231GP. Please check the following items:
The device can be used for Point-to-Point (one CO device
to one CPE device) connection or Point-to-Multipoint (one
multi-port CO device to multi CPE devices) and allows data
and voice to work on the same telephone lines.
The VC-231GP provides only one RJ11 connector for VDSL2
port to build VDSL2 connection. For voice device connec-
tion, there is an additional splitter from the package of the
VC-231GP, which is an ideal choice.
Depending on the quality of telephone line, the maximum
distance of one VDSL2 segment is 1.4km (4593ft) with AWG
24 telephone wires. The distance could vary on the quality of
telephone wires.
RJ11 Line
RJ11 Line
Splitter
Phone
RJ11 Phone Jack
RJ45 Cat.5
Twisted-pair Cable
IP Camera IP TV Wireless
PoE PD Switch
LaptopPC
VC-231GP
Ethernet over VDSL 2 Converter
VC-231GP
PWR
VDSL
PoE-in-UseTP
1000
100
CPE
CO
10/100/1000
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Telephone wire
PoE