Datasheet

VC-231GP
3
Point-to-Point Application -- LAN to LAN Connection
Two sets of the VC-231G/VC-231GP could be used to link two local area networks that are located in a different place. Through the normal telephone
line, the 150/150Mbps (G.INP, Sym, 8dB) symmetric backbone can be set up, but one VDSL2 Bridge must be Master (CO mode) and the other one is
Slave (CPE mode).
Point-to-Multipoint Application -- Connect to IP DSLAM
To build a local Internet in apartments, hotels and campuses and hospitality environments, it requires:
■ The multi-port VDSL2 IP DSLAM or VDSL2 switch (for example, PLANET VC-820M) operates as a CO Master and needs to be placed in the wiring
center (MDF room) and connects to the telephone line system.
■ On the other hand, it needs to install one or many CPE Slaves (the VC-231GP) on the individual client side and connect to the multi-port Master through
the telephone lines.
Applications
10G
1000BASE-T UTP
10G
10GBASE-SR/LR Fiber-optic
VDSL2
VDSL2
NVR
VC-231GP
(CPE)
VC-231G
(CO)
VC-231G
(CO)
VC-231G
(CO)
Garage Front Door Living Room
VDSL2VDSL2
VDSL2
VDSL2
VDSL2
VDSL2
L2+ Switch
VC-231GP
(CPE)
VC-231GP
(CPE)
IP Cam IP Cam
Wireless AP
PoE
1000BASE-T UTP with PoE
PoE PoE PoE
ADSL2+ Fallback
For those ISPs that still provide ADSL broadband service, the VC-231GP can support transmission rates up to 24Mbps downstream and 1Mbps upstream with
the ADSL2+ technology. The VC-231GP establishes a connection with ISP and can be also directly switched over to VDSL2 after the ISP network upgrade.
Room 1001
Room 1002
FTTBuilding
Telephone Wire
1.4 km
VDSL2
VDSL2
Telephone Wire
1.4 km
Switch
VC-231GP(CPE)
VC-231GP(CPE)
IPTV IP Phone
PoE PD Switch
PC Laptop Phone
1000BASE-T UTP
PoE
PoE
1000BASE-T UTP with PoE
Telephone wire
VDSL2
VDSL2
VDSL2 Switch
(Multi-Port CO)
IPTV IP Phone
PoE PD Switch
PC Laptop Phone
PoE