Datasheet

VC-231GP
2
150/150Mbps Downstream/Upstream High Performance Gigabit Ethernet over Phone Wire
Via the latest VDSL2 technology, the VC-231GP offers selectable asymmetric/symmetric band profile capability. It works well with a pervasive telephone
line network with a symmetric data rate of up to 150/150Mbps (G.INP, Sym, 8dB) over a distance of 300m and 21/11Mbps over a long distance of 1.4km.
PLANET Gigabit Ethernet over VDSL2 series offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need
of rewiring.
Versatile, Flexible and Easy Installation
PLANET Gigabit Ethernet-over-VDSL2 converters come with a plug-and-play design. The VC-231GP offers two operation modes, CPE and CO, for
application -- CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch.
For point-to-point connection, the VC-231GP in the CPE mode and the VC-231G or VC-234G in the CO mode must be set up as one pair of converters to
perform the connection. It gives administrators the ability to reply a fresh local Intranet in various locations by utilizing the original network structure without
additional costs.
Door
Phone
IP Phone
11ac
Wi-Fi AP
IP Camera
PTZ
Camera
802.3at
30W
802.3at
30W
802.3af
15W
802.3af
15W
52~54V DC
OFF
ON
CO
CPE
G.INP
Interleave 8dB
12dB
Mode Tran.
Sym.
Asym.
Band SNR
1 2 3 4
ON
VC-231G(CO)
Up to 1.4km
VDSL2
Telephone Wire
SplitterSplitter
Main Office
(PBX, Telco Co,
wire closet)
Phone
Ethernet over VDSL2 and Telephone Network
PoE IP Camera
NVR
VC-231GP(CPE)
8dB
12dB
OFF
ON
SNR
1 2 3 4
ON
12dB
OFF
ON
SNR
1 2 3 4
ON
Switch
1000BASE-T UTP
PoE
1000BASE-T UTP with PoEVDSL2
VDSL2
Telephone wire
PoE
Stable and Reliable DSL Data Connection
With the integrated support for the ITU-T’s new G.993.5 Vectoring technology, the VC-231GP works in conjunction with vectoring-enabled DSLAMs to
remove crosstalk interference and improve maximum line bandwidth across the existing copper infrastructure.
Implementing with Existing Telephone System
Use the additional splitter from the package of the VC-231GP to share the existing phone line with POTS, thus replacing the existing copper wiring is
not necessary. Just plug the VC-231GP with the additional splitter into the existing RJ11 telephone jack and a high-performance VDSL2 network can be
connected. It is ideal for use as an Ethernet extender to an existing Ethernet network.
IEEE 802.3at Power over Ethernet Plus
The PoE in-line power following the IEEE 802.3at Power over Ethernet Plus
standard makes the VC-231GP able to deliver Gigabit speed Ethernet data and
up to 30 watts of power to remote PoE PDs over one Cat.5E/6 Ethernet cable.
The VC-231GP provides more flexibility in power requirements for all kinds of
PDs at affordable installation costs.