Datasheet

VC-231
Data Sheet
3
Applications
Last Mile of FTTx Deployment
The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth
VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers´ houses.
The 10/100Mbps port of VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is
excellent for phone line network built under Internet because every room or house could use the existing phone line to transmit data through the
Internet and the whole building could share the Internet to the wider area network with minimum cost.
Specification
Product Ethernet over VDSL2 Converter
Model VC-231
Hardware Specification
Ports
10/100Base-TX 1 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X
VDSL 1 RJ-11, female Phone Jack
PHONE Additional Splitter for POTS connection
DIP Switch & Functionality
• 4 position DIP switch
• CO / CPE mode select
• Selectable fast and interleaved mode
• Selectable target 17a / 30a profiles
• Selectable target SNR mode
Encoding
• VDSL-DMT
- ITU-T G.993.1 VDSL
- ITU-T G.997.1
- ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
LED Indicators
• One Power
• 3 for RJ-11/VDSL2
• 2 for per RJ-45 10/100Base-TX port
Cabling
Ethernet
10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft)
VDSL Twisted-pair telephone wires (AWG24 or better) up to 1.4km
Video
Data
Voice
FTTBuilding
Customer Home
1000Base-LX
10 km
Telephone Wire
1.4 km
Telephone Wire
1.4 km
1000
VDSL2
VDSL2
100Base-TX UTP
1000Base-T UTP
Telephone wire
1000Base-SX/LX Fiber-optic
1000
VC-231/CPE
IPTV
Splitter
VC-231/CO
VC-231/CPE
IPTV
Splitter
VC-231/CPE
IPTV
Splitter
VC-231/CPE
IPTV
Splitter
VDSL2
VDSL2
VDSL2
VDSL2
PSTN
ISP Central Building