(V2) Quick Guide
– 1 – – 2 –
– 3 – – 4 –
1. Package Contents
Thank you for purchasing PLANET 8/16/24-Port Gigabit 802.3bt
PoE++ Managed Injector Hub, UPOE-800G/UPOE-1600G/UPOE-
2400G. “802.3bt PoE++ Managed Injector Hub” mentioned in
this quick installation guide refers to the UPOE-800G/UPOE-1600G/
UPOE-2400G.
Model Name
10/100/1000T
Data + Power
Output Ports
10/100/1000T
Data
Input Ports
10/100/1000T
RJ45
Management Port
UPOE-800G 8 8 1
UPOE-1600G 16 16 1
UPOE-2400G 24 24 1
Open the box of the 802.3bt PoE++ Managed Injector Hub and
carefully unpack it. The box should contain the following items:
The 802.3bt PoE++ Managed Injector Hub x 1
Quick Installation Guide x 1
Power Cord x 1
Rubber Feet x 4
19” Rack-mounting Brackets x 2
If any item is found missing or damaged, please contact your local
reseller for replacement.
2. Requirements
Workstations running Windows XP/2003/Vista/7/8/2008/10, MAC
OS X or later, Linux, UNIX, or other platforms are compatible
with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Interface
Card)
Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with
RJ45 connectors.
The above PC is installed with Web browser.
Note
It is recommended to use Internet Explorer 8.0 or
above to access the 802.3bt PoE++ Managed
Injector Hub. If the Web interface of the 802.3bt
PoE++ Managed Injector Hub is not accessible,
please turn off the anti-virus software or firewall and
then try it again.
3. Starting Web Management
The following shows how to start up the Web Management of
the 802.3bt PoE++ Managed Injector Hub. Note the 802.3bt
PoE++ Managed Injector Hub is congured through an Ethernet
connection. Please make sure the manager PC must be set to the
same IP subnet address.
For example, the default IP address of the 802.3bt PoE++
Managed Injector Hub is 192.168.0.100, then the manager
PC should be set to 192.168.0.x (where x is a number
between 1 and 254, except 100) and the default subnet mask is
255.255.255.0.
PC / Workstation with
Web Browser
Gigabit 802.3bt PoE++ Managed Injector Hub
192.168.0.x
IP Address:
192.168.0.100
RJ45 Management Port
Management
1000 10/100
Reset
1000
10/100
Figure 3-1: IP Management Diagram
Logging in to the 802.3bt PoE++ Managed Injector Hub
1. Use Internet Explorer 8.0 or above Web browser and enter IP
address http://192.168.0.100 to access the Web interface.
2. When the following dialog box appears, please enter the default
user name and password “admin”. The login screen in Figure
3-2 appears.
Default Username: admin
Default Password: admin
Figure 3-2: Web Login Screen
3. After entering the password, the main screen appears as
Figure 3-3 shows.
Note
The following web screen is based on the UPOE-
2400G. The displays of the UPOE-800G and UPOE-
1600G are the same as that of the UPOE-2400G.
Figure 3-3: Web Main Screen of 802.3bt PoE++ Managed Injector Hub
The 802.3bt PoE++ Managed Injector Hub Menu on the left of
the Web page lets you access all the commands and statistics the
802.3bt PoE++ Managed Injector Hub provides.