(V2) Datasheet

UPOE-800G
3
Quick and Easy 802.3bt/at PoE Network Deployment
The UPOE-800G is installed between a regular Ethernet Switch and the PDs. There are totally 16 RJ45 STP ports on the front panel of the UPOE-800G,
of which the 8 ports are on the lower stack functioned as "Data input" while the other 8 ports are on the upper stack functioned as "PoE (Data and
Power) output". Both power and data are transferred simultaneously over the UTP cables to various 802.3bt/at PDs without affecting the existing network
performance and functions.
Selectable End-span/Mid-span/UPoE 802.3bt PoE
++
Power Inline Mode
Port Description
1
2
3
PoE
Function
Schedule
Porce
Power
Priority
Power
Mode
Device
Class
Current
Used[mA]
Powered
Used [W]
Power
Limit [W]
Enable Profile 1 BT Off High 0
--
0
90
Enable Profile 1 BT Off High 0
--
0
90
Enable Profile 1 BT
Midspan
Endspan
UPOE
BT
Off High 0
--
0
90
Data + Power
60 Watts
Data + Power
30 Watts
Data + Power
30 Watts
End-span Mode Mid-span Mode Ultra PoE Mode
Data + Power
60-95 Watts
802.3bt PoE++ Mode
End-span
Mid-span
802.3at PoE Multi-Channel /
High Power Wireless AP
Thin Client
60-watt Ultra PoE Splitter+
Non-PoE Device
60-watt
802.3bt PoE++ IP Camera
Gigabit 802.3bt PoE++ Managed Injector Hub
Non-PoE Switch
UPOE-800G
100~240V AC
or
UPS
AC
PoE PoE
PoE PoE
Power
Data
Power
Data
Power
Data
Data Uplink
Power Line (AC)
AC
DC
Power Line (DC)
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
a
N
30W
95W
60W
Ultra PoE
Splitter
DC
60W
Heater
With data and Power over Ethernet from one unit, the UPOE-800G can reduce power cable deployment and eliminate the need for dedicated electrical
outlets on the wall, ceiling or any unreachable place.