(V2) Datasheet

ManualsBrandsPLANET Technology ManualsPOE Hubs8-Port Gigabit 802.3bt PoE++ Managed Injector Hub (400W)

UPOE-800G

8-Port Gigabit 802.3bt PoE++ Managed Injector Hub (400 watts)

Ready to Deploy Next Generation IEEE 802.3bt PoE++ Standard

PLANET’s newly-improved UPOE-800G, a high-density, rack-mountable managed

802.3bt PoE++ Managed Injector Hub, features eight 10/100/1000BASE-T 90-watt

802.3bt type-4 PoE++ injector ports with PLANET intelligent PoE functions

through web user interface for remote management. With a total PoE budget of

400 watts, it delivers ultra PoE power over Ethernet UTP cables which allow data

and power to transmit simultaneously to a remote 802.3bt/at powered device (PD).

Interface

• 16-port RJ45

– 8-port 10/100/1000Mbps “Data input”

– 8-port 10/100/1000Mbps “Data + Power output”

• One 10/100/1000BASE-T management port

802.3bt Power over Ethernet

• Complies with IEEE 802.3bt Power over Ethernet Plus Plus

• Backward compatible with IEEE 802.3at Power over

Ethernet Plus

• Up to 8 ports of IEEE 802.3at/IEEE 802.3bt PoE devices

powered

• 8 PoE ports with built-in 802.3bt type-4 PoE 90W or Ultra

PoE 95-watt injector function

• All PoE ports support 802.3at end-span/mid-span PoE

36W injector function

• Auto detects powered device (PD)

• Circuit protection prevents power interference between

ports

• Remote power feeding up to 100 meters

PoE Management

• Per port PoE power schedule

• PoE function enable/disable

• Per port PoE function enable/disable

• Per port PoE operation mode selection

• PoE port power feeding priority

• PDclassicationdetection

• Over temperature protection

• PD alive check

• PoE schedule

Management

• Web interface for remote management

• Supports Network Time Protocol (NTP)

• Firmware upgrade through Web interface

• PLANETSmartDiscoveryutilityautomatically nds

PLANET devices on the network

• SNMP v1, v2c and v3 for system status monitoring

• SNMPtrapforalarmnoticationofevents

• System log/remote syslog

The UPOE-800G provides a quick, safe and cost-effective 802.3bt PoE++ network

solution for small businesses and enterprises. It is designed to perfectly upgrade an

existing network infrastructure to 802.3bt PoE++ network system without replacing

the existing Ethernet switches. It also enables centralization of the power supply

and optimizes the installation and power management of remote network devices.

8-Port 802.3bt++ 90W “Data + Power” Output

802.3bt++ 90/60W PoE-in-Use LED

802.3at/af PoE-

in-Use LED

8-Port 10/100/1000T “Data” Input

10/100/1000T

Management Port

PoE Power

Usage LED

Fan Failure LED

PoE Failure

LED

Power LED

Summary of content (8 pages)

PAGE 1
UPOE-800G 8-Port Gigabit 802.3bt PoE++ Managed Injector Hub (400 watts) Interface • 16-port RJ45 –– 8-port 10/100/1000Mbps “Data input” –– 8-port 10/100/1000Mbps “Data + Power output” • One 10/100/1000BASE-T management port 802.3bt Power over Ethernet • Complies with IEEE 802.3bt Power over Ethernet Plus Plus Ready to Deploy Next Generation IEEE 802.3bt PoE++ Standard PLANET’s newly-improved UPOE-800G, a high-density, rack-mountable managed 802.
PAGE 2
UPOE-800G 802.3bt PoE++ – 60~95-watt Power over 4-pair UTP Solution Hardware As the UPOE-800G adopts the IEEE 802.bt PoE++ standard and PoH technology, • 19-inch rack mountable; 1U height it is capable to source up to 95 watts of power by using all the four pairs of • Reset button for resetting to default setting and system standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each reboot remote PoE compliant powered device (PD).
PAGE 3
UPOE-800G Selectable End-span/Mid-span/UPoE 802.3bt PoE++ Power Inline Mode Port PoE Function Description Power Mode Schedule Porce Power Priority Device Current Class Used[mA] Powered Power Used [W] Limit [W] 1 Enable Profile 1 BT Off High -- 0 0 90 2 Enable Profile 1 BT Off High -- 0 0 90 3 Enable Profile 1 BT Off High -- 0 0 90 Midspan Endspan UPOE BT End-span Mode Mid-span Mode Ultra PoE Mode 802.
PAGE 4
UPOE-800G User-friendly Web Management Interface To efficiently manage the powered devices, the UPOE-800G provides remote Web management interface in which administrators can control the system and PoE functions for powered devices. It can automatically detect the power status of each port and show messages on its Web management interface. These features also provide users with a cost-effective way to manage the device via Internet whenever they are at work or at home.
PAGE 5
UPOE-800G PoE Schedule for Energy Savings Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the UPOE-800G can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
PAGE 6
UPOE-800G PoE Usage Monitoring Via the power usage chart in the web management interface, the UPOE-800G enables the administrator to monitor the status of the power usage of the connected PDs in real time. High Power Budget for PoE Extension With up to 95-watt PoE output capability, the UPOE-800G can extend much longer distance by using PLANET PoE Extender for powering up the PoE PD which can be installed over more than 100 meters away.
PAGE 7
UPOE-800G Specifications UPOE-800G Product Hardware Interface “Data” Input Ports 8 x RJ45 “Data + Power” Output Ports 8 x RJ45 Management Port 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate 10/100/1000Mbps System: SYS PWR x 1 (green) PoE Failure x 1 (red) Fan Failure x 2 (red) LED Management port x 2: 1000 (green), 10/100(orange) Per PoE Port: 802.3bt/UPoE PoE-in-use x 1 (green) 802.
PAGE 8
UPOE-800G IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.