User Manual

User’s Manual of UPOE-800G/UPOE-1600G/UPOE-2400G
31
•
Firmware Upgrade
Allow to upgrade the latest firmware in the future.
Explained in section 4.3.5
.
• Configuration Setting Allow to back up or restore system configuration. Explained in section 4.3.6.
•
Factory Default
Allow to reset system to factory default setting. Explained in section 4.3.7.
• System Log
Allow to enable system log and to record system log. Explained in section
4.3.8.
• System Reboot Allow to reboot system. Explained in section 4.3.9.
4.3.1 System Information
This section displays system information of Ultra PoE Managed Injector Hub as the screen in Figure 4-3-1 appears. Table
4-3-1 describes the system information of the Ultra PoE Managed Injector Hub.
Figure 4-3-1: System Information Web Page Screen
Object
Description
• System Name Displays the Ultra PoE Managed Injector Hub model name.
• MAC Address Displays the MAC address of Ultra PoE Managed Injector Hub.
• Software Version Displays the current firmware version of Ultra PoE Managed Injector Hub.
• Build Time Displays the firmware build time.
• Hardware Version Displays the hardware version of Ultra PoE Managed Injector Hub.
• Attain IP Protocol Displays the currently attained IP protocol of Ultra PoE Managed Injector Hub.
• IP Address Displays the current IP address of Ultra PoE Managed Injector Hub.
• Subnet Mask Displays the current subnet mask address of Ultra PoE Managed Injector Hub.
• Gateway Displays the current gateway address of Ultra PoE Managed Injector Hub.
• System Date
Displays the current system date of Ultra PoE Managed Injector Hub. The system
date will be correct if NTP function is enabled and the Hub is connected to
Internet.
• System UpTime Displays when the system will start up.
Table 4-3-1: Descriptions of the System Information Objects Screen