User Manual

User’s Manual of UPOE-800G/UPOE-1600G/UPOE-2400G
20
2.1.3 Injector Rear Panel
The rear panel of the Ultra PoE Managed Injector Hub indicates an AC inlet power socket, which accepts input power from
100 to 240V AC, 50/60Hz. Figures 2-1-5 & 2-1-6 shows the rear panel of the Ultra PoE Managed Injector Hub.
Figure 2-1-5: UPOE-800G/UPOE-1600G Rear Panel
Figure 2-1-6: UPOE-2400G Rear Panel
The Ultra PoE Managed Injector Hub is a power-required device, meaning Ultra Po
E Managed Injector
Hub
will not work till it is powered. If your networks should be active all the time, please consider using
UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network
downtime.
In some areas, installing a surge suppression device may also help to protect your device
from being
damaged by unregulated surge or current to the Ultra PoE Managed Injector Hub or the power adapter.
2.2 Installing the Ultra PoE Managed Injector Hub
This section describes how to install your Ultra PoE Managed Injector Hub and make connections to the Ultra PoE
Managed Injector Hub. Please read the following topics and perform the procedures in the order being presented. PLANET
Ultra PoE Managed Injector Hub does not need software configuration.
2.2.1 Desktop Installation
To install an Ultra PoE Managed Injector Hub on a desktop or shelf, simply complete the following steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom of the Ultra PoE Managed Injector Hub.
Step 2: Place the Ultra PoE Managed Injector Hub on a desktop or shelf near an AC power source.
Step 3: Keep enough ventilation space between the Ultra PoE Managed Injector Hub and the surrounding objects.