User Manual

User’s Manual of UPOE-800G/UPOE-1600G/UPOE-2400G
18
The following is the summary table of reset button functions:
Reset Button Pressed and Released
Function
About 5 second Reboot the Ultra PoE Managed Injector Hub.
About 10 seconds
Reset the Ultra PoE Managed Injector Hub to Factory Default
configuration. The Ultra PoE Managed Injector Hub
will reboot
and load the default IP settings.
Be sure that you back up the current configuration of Ultra PoE Managed Injector Hub before
resetting Ultra PoE Managed Injector Hub or
else the entire configuration will be erased when
pressing the “RESET” button.
2.1.2 LED Indicators
The front panel LEDs indicates instant status of system power, PoE and fan failure, management port speed and
Link/Active, PoE power usage status and per PoE port links status, thus helping administrator to monitor and troubleshoot
when needed.
UPOE-800G
System
LED
Color
Function
SYS Power Green Lights to indicate power on.
PoE Fail Red Lights to indicate PoE module failure.
FAN1 Fail
Red
Lights to indicate FAN1 stops.
FAN2 Fail
Red
Lights to indicate FAN2 stops.
1000 Green Lights to indicate management port is working on 1000Mbps Ethernet speed.
10/100 Orange Lights to indicate management port is working on 10/100Mbps Ethernet speed.
PoE Power Usage (W)
LED
Color
Function
100W
Green
Lights to indicate the PoE power consumption has 100W or over.
200W
Green
Lights to indicate the PoE power consumption has 200W or over.
300W
Green
Lights to indicate the PoE power consumption has 300W or over.
400W
Green
Lights to indicate the PoE power consumption has 400W.
Per PoE Port:
LED Color Function
Ultra 60W
PoE-in-Use
Green Lights to indicate that the port is in use and supplying 54V DC power.
802.3at/af
PoE-in-Use
Orange Lights to indicate that the port is in use and supplying 54V DC power.