User Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 -
Caution
1. Power o the PoE++ injector Hub before
adjusting the DIP switch and then power it on.
2. Before connecting the “Data + Power” output port
to powered device (PD), make sure that it accepts
PoE input via DIP switch setting to prevent
damage.
3. The legacy detection is to identify the PD devices
that do not fully follow the IEEE 802.3af/at/bt
standard and their unique electrical signatures to
enable the PoE injector to provide the power to
those PD devices.
4. Before connecting the PoE++ injector Hub to your
powered device (PD), please check to ensure that
your powered device (PD) can accept 60-watt
PoE power through pin 1/2 (-) & 3/6 (+) and pin
4/5 (+) & 7/8 (-). Otherwise, it will damage your
powered device (PD).
4. Installation
For the places hard to nd the power inlet, the PoE++ Injector
Hub and IEEE 802.3bt PoE++ Splitter (POE-173S) provide the
easiest way to power your Ethernet devices such as PoE PTZ
speed dome cameras on the ceiling and wireless access point
installed on the top of the building. The PoE++ Injector Hub
supports full DC 52V~54V power for any remote IEEE 802.3bt/
at PD.
5. Three-View Diagram
49.00
Ø7.00
70.30
94.00
39.20
M3-2
1 2 3 4
DATA PoE
++
1 2 3 4
DC Input Range:
52-5 4V , 3.4A max.
802.3bt
Force
PoH + Legacy
1 2 3 4
PoE-in-Use
50W 100W 160W
PWR
PoE Usage
802.3bt/PoH
802.3at/af
Unit: mm
B
A
Figure 5-1: UPOE-400 Three-View Diagram
A: The distance between two wall mounting holes.
B: The holes for option DIN-Rail Kit mounting (RKE-DIN).
The PoE++ Injector Hub is installed between a regular Ethernet
Switch and the PDs. As the PoE++ Injector Hub adopts the
IEEE 802.bt PoE++ standard and PoH technology, it is capable
to source up to 95 watts of power by using all the four pairs
of standard Cat5e/6/6A/7 Ethernet cabling to deliver power
and 10Mbps/100Mbps/1Gbps/2.5Gbps/5Gbps full-speed data to
a remote 802.3bt/at PoE compliant PD over a distance of 100
meters.
802.3at PoE Multi-Channel /
High Power Wireless AP
60-watt Ultra PoE Splitter+
Non-PoE Device
Multi-Gigabit 802.3bt PoE++ Injector Hub
Gigabit Switch
UPOE-400
PoE PoE
PoE PoE
Power
Data
Power
Data
DC
Power Line (DC)
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
a
N
30W
Thin Client
95W
60W
Ultra PoE
Splitter
DC
60-watt
802.3bt PoE++ IP Camera
60W
Heater
Power
DC Input
DC
or
UPS
AC-to-DC Adapter
110-240V AC
Data Uplink
6. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource on PLANET web site rst to check if it
could solve your issue. If you need more support information,
please contact PLANET support team.
PLANET online FAQs:
qhttp://www.planet.com.tw/en/support/faq
Support team mail address:
[e-mail]
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
FCC Warning
This device has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
Instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
WEEE Warning
To avoid the potential eects on the environment and
human health as a result of the presence of
hazardous substances in electrical and electronic
equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted
municipal waste and have to collect such WEEE separately.
PLANET TECHNOLOGY CORPORATION
e-mail: [e-mail] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:[phone] Fax:[phone]
EC Declaration of Conformity
I hereby confirm that the following equipment complies with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility Directive on (2014/30/EU).
Type of Product:
4-Port Multi-Gigabit 802.3bt PoE++ Injector Hub
Models:
UPOE-400
Produced by:
Manufacturer’s Name: Planet Technology Corporation
Manufacturer’s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan, R.O.C.
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 (2015 + AC:2016)
EN 55024 (2010 + A1:2015)
EN 61000-3-2 (2014)
EN 61000-3-3 (2013)
EN 55035 (2017)
Person responsible for making this declaration
Name: Kent Kang
Title: Director
Taiwan
Aug. 10, 2020
Country
Date
Legal Signature