User Manual

- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET 4-Port Multi-Gigabit 802.3bt
PoE++ Injector Hub, UPOE-400. In the following sections, the
term “PoE++ Injector Hub” means the UPOE-400.
Open the box of the PoE++ Injector Hub and carefully unpack
it. The box should contain the following items:
PoE++ Injector Hub x 1 User’s Manual x 1
54V/180W, 3.33A,
Switch Adapter x 1
AC Power Cord x 1
If any of these pieces are missing or damaged, please contact
your dealer immediately; if possible, retain the carton including
the original packing material, and use them again to repack
the product in case there is a need to return it to us for repair.
Dimensions (W x D x H) 94 x 70.3 x 39.2mm
Weight 275g
Enclosure Metal case
Installation
Wall-mount and DIN-rail kit
(optional)
Network Cable
Twisted-pair cable up to 100
meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4,
5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5,
5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
2.5G/5GBASE-T: 4-pair UTP Cat.6,
6A, 7
Power over Ethernet
PoE Standard
IEEE 802.3bt PoE++, 4-pair type
4 PSE
IEEE 802.3at PoE+, 2-pair type
2 PSE
PoE Power Supply Type End-span + Mid-span
Power Pin Assignment
End-span: 1/2 (-), 3/6 (+);
Mid-span: 4/5 (+), 7/8 (-)
PoE Power Budget
(max.)
160 watts
 802.3bt PoE++ TP Interface LEDs
LED Color Function
PoE-
in-Use
Green
Lights to indicate that the port is providing
802.3bt PoE++/PoH/Force power to remote
powered device.
Amber
Lights to indicate that the port is providing
802.3af/at PoE+ power to remote powered
device.
O
To indicate that the port is not providing
PoE power to remote powered device.
3.4 Right Panel
The right panel of the PoE++ Injector Hub consists of one DC
power jack, one DIP switch for “802.3bt”, “PoH + Legacy”
and “Force” modes selection, and one ground screw.
DC Input Range:
52-54V , 3.4A max.
802.3bt
Force
PoH + Legacy
Figure 3-4: UPOE-400 Right Panel View
3. Hardware Introduction
3.1 Product Outlook
1 2 3 4
DATA PoE
++
1 2 3 4
DC Input Range:
52-5 4V , 3.4A max.
802.3bt
Force
PoH + Legacy
1 2 3 4
PoE-in-Use
50W 100W 160W
PWR
PoE Usage
802.3bt/PoH
802.3at/af
Figure 3-1: UPOE-400 Product Outlook View
3.2 Left Panel
The left panel of the PoE++ Injector Hub consists of four
“Data” input ports and four “Data + Power” output ports
within 10Mbps/100Mbps/1Gbps/2.5Gbps/5Gbps operation speed
support.
1 2 3 4
DATA PoE
++
1 2 3 4
Figure 3-2: UPOE-400 Left Panel View
2.ProductSpecications
Model UPOE-400
Hardware Specications
Copper
Ports
“Data” Input
Ports
4 x RJ45
“Data + Power”
Output Ports
4 x RJ45
LED Indicator
System:
Power (Green)
PoE-in-Use:
802.3bt/PoH (Green)
802.3at/af (Orange)
PoE Usage:
50W/100W/160W (Amber)
Data Rate 10/100/1000/2500/5000Mbps
Power Requirements DC 52~54V
Power Consumption
(Ethernet Full Loading)
System ON without loading
AC 110V: 0.4watts/1.3BTU
AC 220V: 0.3watts/1BTU
Full loading with PoE
AC 110V: 242watts/825BTU
AC 220V: 236watts/805BTU
DIP Switch Mode and Per
Port PoE Output
 802.3bt: 90W PoE Output
 PoH + Legacy: 95W PoE Output
 Force: 60W PoE Output
Number of devices that
can be powered
4
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3bz 2.5G/5GBASE-T
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet
Plus
IEEE 802.3bt Power over Ethernet
Plus Plus
Environment
Temperature
Operating: 0~50 degrees C
Storage: -10~70 degrees C
Humidity
(Non-condensing)
Operating: 5~95%
Storage: 5~95%
3.3 Front Panel
The front panel of the PoE++ Injector Hub consists of one
power LED, four “PoE-in-Use” LEDs and three “PoE Usage”
LEDs.
1 2 3 4
PoE-in-Use
50W 100W 160W
PWR
PoE Usage
802.3bt/PoH
802.3at/af
Figure 3-3: UPOE-400 Front Panel View
 System LEDs
LED Color Function
PWR Green
Lights to indicate PoE++ Injector Hub has
power.
PoE
Usage
Amber
50W, 100W, 160W
Lights to indicate the system consumes over
50-/100-/160-watt PoE power budget.
Blinks to indicate the system consumes less
50-/100-/160-watt PoE power budget.
Power Information
The power jack of PoE++ Injector Hub measures 2.1mm in the
central post and requires +52-54V DC power input.
DIP Switch Information
To meet the demand of various powered devices consuming
stable PoE power, the PoE++ Injector Hub provides one DIP
switch for three PoE operation mode options as shown in the
following table.
DIP Switch
Mode
Function
802.3bt
(Default)
This mode makes the PoE++ Injector Hub
operate as 90-watt 802.3bt PoE++ type 4 PSE.
PoH +
Legacy
This mode makes the PoE++ Injector Hub
operate as 95-watt PoH (Power over HD-BASE-T)
PSE with Legacy function.
Force
This mode makes the PoE++ Injector Hub
operate as 4-pair 60-watt force PoE PSE.