User Manual

User’s Manual of UPOE-800G/UPOE-1600G/UPOE-2400G
26
3.3 Management Method
User can manage the Ultra PoE Managed Injector Hub by Web Management via a network connection.
3.3.1 Web Management
The Ultra PoE Managed Injector Hub can be configured through an Ethernet connection. The factory default IP address is
192.168.0.100 with subnet mask 255.255.255.0, so please make sure the manager PC must be set to the same IP subnet
address. For example, if Ultra PoE Managed Injector Hub IP address is set to factory default, then your manager PC
should be set to 192.168.0.x (where x is a number between 1 and 254, except 100) with a subnet mask of 255.255.255.0.
1. Use Internet Explorer 8.0 or above Web browser. Enter IP address http://192.168.0.100 to access the Web interface.
Figure 3-1-1: IP Management Diagram
2. When the following login screen appears, please enter the default username "admin" and password “admin” to login
the main screen of Ultra PoE Managed Injector Hub. The login screen in Figure 3-1-2 appears.
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
Figure 3-1-2: Ultra PoE Managed Injector Hub Web Login Screen