Quick Guide

– 5 – – 6 –
Figure 3-4: 802.3bt PoE++ Managed Injector Hub Menu
Now, you can use the Web management interface to continue the
802.3bt PoE++ Managed Injector Hub management. Please
refer to the user’s manual for more.
4.RecoveringBacktoDefaultConguration
 IP Address has been changed or admin password has
been forgotten –
To reset the IP address to the default IP Address “192.168.0.100”
or reset the login password to default value, press the reset
button on the front panel for about 5 seconds. After the device is
rebooted, you can log in the Web interface management within the
same subnet of 192.168.0.xx.
Management
1000 10/100
Reset
SYS PWR
PoE Fail
FAN1 FAN2
Fail
1 32 4
1
32
4
ACTLNK
1000
ACTLNK
10/100
UPOE-2400G
bt PoE-in-Use
at/af PoE-in-Use
Reset
Figure 4-1: 802.3bt PoE++ Managed Injector Hub Reset Button
5. Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource and User’s Manual on PLANET Web site rst
to check if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address:
[e-mail]
UPOE-800G/1600G/2400Gv2 User’s Manual
https://www.planet.com.tw/en/support/downloads?&method=keywo
rd&keyword=UPOE&view=3#list
Copyright © PLANET Technology Corp. 2019.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.