Datasheet

UPOE-1600G
3
Quick and Easy 802.3bt/at PoE Network Deployment
The UPOE-1600G is installed between a regular Ethernet Switch and the PDs. There are totally 32 RJ45 STP ports on the front panel of the UPOE-1600G,
of which the 16 ports are on the lower stack functioned as "Data input" while the other 16 ports are on the upper stack functioned as "PoE (Data and
Power) output". Both power and data are transferred simultaneously over the UTP cables to various 802.3bt/at PDs without affecting the existing network
performance and functions.
With data and Power over Ethernet from one unit, the UPOE-1600G can reduce power cable deployment and eliminate the need for dedicated electrical
outlets on the wall, ceiling or any unreachable place.
Selectable End-span/Mid-span/UPoE 802.3bt PoE
++
Power Inline Mode
Port Description
1
2
3
PoE
Function
Schedule
Porce
Power
Priority
Power
Mode
Device
Class
Current
Used[mA]
Powered
Used [W]
Power
Limit [W]
Enable Profile 1 BT Off High 0
--
0
90
Enable Profile 1 BT Off High 0
--
0
90
Enable Profile 1 BT
Midspan
Endspan
UPOE
BT
Off High 0
--
0
90
Data + Power
60 Watts
Data + Power
30 Watts
Data + Power
30 Watts
End-span Mode Mid-span Mode Ultra PoE Mode
Data + Power
60-95 Watts
802.3bt PoE++ Mode
End-span
Mid-span
802.3at PoE Multi-Channel /
High Power Wireless AP
Thin Client
60-watt Ultra PoE Splitter+
Non-PoE Device
60-watt
Ultra PoE IP Camera
Gigabit 802.3bt PoE++ Managed Injector Hub
Non-PoE Switch
UPOE-1600G
100~240V AC
or
UPS
AC
PoE PoE
PoE PoE
Power
Data
Power
Data
Power
Data
Data Uplink
Power Line (AC)
AC
DC
Power Line (DC)
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
a
N
36W
95W
60W
Ultra PoE
Splitter
DC
60W
Heater