Quick Guide
Table Of Contents
- Sections
- OVERVIEW
- Installing Oracle VM VirtualBox
- Installing UNI-MNS-LITE
- BEFORE FIRST LOGIN
- SETUP WIZARD
- MAIN UI INTRODUCTION
- DASHBOARD INTRODUCTION
- FOOTER INTRODUCTION
- SYSTEM MENU - DOMAIN
- SYSTEM MENU- AP CONTROL
- AP Control UI – Structure & Description
- Main Menu – Preference
- Main Menu – Profiles
- Main Menu – Profiles
- Main Menu – 3/Profiles
- Main Menu – 3/Profiles
- Main Menu – Control
- Main Menu – Control
- Main Menu – Control
- Main Menu – Control
- Main Menu – Control
- Main Menu – Map It
- Main Menu – Map It
- Main Menu – Map It
- Main Menu – Map It
- Main Menu – Map It
- Main Menu – Statistics
- SYSTEM MENU – REFRESH
- SYSTEM MENU - SYSTEM CONFIGURATION
- SYSTEM MENU - NETWORK SERVICES
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- System Menu – Network Services
- SYSTEM MENU - MAINTENANCE
- SYSTEM MENU - EXIT
- APPENDIX
15
Device Setting
Switch: Log in to the Switch’s Web User Interface and refer to the picture below to enable the SNMP, LLDP
and Remote Management as shown in Figures 1, 2 and 3.
AP: Log in to the AP’s Web User Interface and refer to Figure 3 below to configure the AP to “Managed AP".
Then, click “Apply Change”. To support SNMP AP, enable the SNMP function.
IP Cam: The ONVIF function is enabled by default.
Default IP: 192.168.1.100 192.168.1.X