Universal Network Management Central Controller with LCD UNC-NMS Quick Installation Guide
Table of Contents 1. Package Contents........................................................................................ 3 2. Hardware Description................................................................................... 4 2.1 Overview............................................................................................. 4 2.2 Dimensions.......................................................................................... 5 2.3 Hardware Specifications................................
1. Package Contents Thank you for purchasing PLANET Universal Controller. PLANET UNC-NMS is described below: UNC-NMS Network Management Central Universal Network Management Central Controller with LCD Open the box of the UNC-NMS and carefully unpack it. The box should contain the following items: UNC-NMS Controller x 1 Quick Installation Guide x 1 Power Cord x 1 Console Cable x 1 Installation Kit x 1 If any item is found missing or damaged, contact your local reseller for replacement.
2. Hardware Description 2.1 Overview Console Port Power/HDD LED LCD LAN 1~6 Ports Reset Button USB 3.
2.
2.3 Hardware Specifications UNC-NMS Product Universal Network Management Central Controller with LCD & 6 10/100/1000T LAN Ports Form Factor 1U Rack-mount Physical Specifications 6 10/100/1000BASE-T Gigabit Ethernet RJ45 ports (LAN 5 and LAN 6 are bypass ports.) I/O Interface 2 USB 3.0 ports (They cannot be used at the same time.) 1 Factory default button (GPIO) 1 RJ45 Console port interface 2 DB-9 COM1, COM2 (reserve) Storage 2.5” 64G SATA HDD LED 2 LED (Power/HDD) LCM Size (Active Area) 49.
3.
User Control Allowing on-demand account creation and userdefined access policy Scalability Free system upgrade and AP firmware bulk upgrade capability Network Services Network Maintenance DDNS Supports PLANET DDNS/Easy DDNS DHCP Built-in DHCP Server for auto IP assignment to APs Management Console; Telnet; SSL; Web browser (Chrome is recommended.
4. Network Configuration Set up the UNC-NMS Controller with Ethernet connection for the first-time configuration shown below. UNC-NMS Default: 192.168.1.100 NMS-500 10.1.30.X Power over Ethernet 10.1.30.X Default Default Default Default Industrial Switch 10.1.30.X or NMS-1000V 10.1.20.X L3 Switch 10.1.20.X Wireless 10.1.20.X Network Security 10.1.20.X IP Address: 192.168.1.
5. Deployed Devices Monitored via UNC-NMS Controller The UNC-NMS can monitor all the deployed wired or wireless NMS-500/NMS-1000V agent level network devices, and it also can monitor the devices under the NMS agents, such as managed switches, media converters, routers, smart APs, VoIP phones, IP cameras, etc. compliant with the SNMP Protocol, ONVIF Protocol and PLANET Smart Discovery utility. Please regularly check PLANET website for the latest compatibility list of managed devices.
1. In UNC-NMS, press the “Site” button. 2. Press the “add a new site” button. 1 2 3. 3.1 Enter the new site information and re-gen a Device ID. 3.2 Press the “Apply” button to finish the Configuration Successfully.
4. Press the “Export” button to create an “NMS-Agent-Conf” file. 5. Click the “Download NMS Agent Configuration” link to get the file.
Step 3: For UNC-NMS to successfully control the site, Site requires some configurations. In NMS, click on “Maintenance” and then select “Remote Management”. Go to the Remote Management page, select “Enable RW”, enter the UNC-NMS DNS or IP address and import the “NMS-Agent-Conf” file, and then press “Apply” to finish the process.
Further Information: The above steps introduce the simple installations and configurations of the UNCNMS Central Controller. For further configurations of PLANET NMS, please refer to the user manual, which can be downloaded from the website. PLANET online FAQs: http://www.planet.com.tw/en/support/faq Support team mail address: support@planet.com.tw User’s Manual: https://www.planet.com.
