Quick Guide
7
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a
PC or notebook computer andto RJ45 type serial (console) port of the
Industrial Managed Switch.
PC/Workstation with
Terminal Emulation Software
Serial Port
Console Port
115200,N,8,1
TSN Industrial
Managed Switch
RJ45 to DB9 RS232 Cable
Reset
Console
115200,N,8,1
Ring R.O. I/O
A terminal program is required to make the software connected to the
Industrial Managed Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port
shouldbeconguredas:
Baud:115200
Parity:None
Data bits: 8
Stop bits: 1
Flowcontrol: None