Datasheet

TSN-6325-8T4S4X
3
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• IEEE 1588v2 PTP (Precision Time Protocol)
• Features IEEE 802.1AS Time Synchronization, IEEE
802.1Qbu Frame Preemption, IEEE 802.1Qbv Enhancements
forScheduledTrafcandIEEE802.1CBSeamless
Redundancy
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– ToS/DSCP/IP Precedence of IPv4/Ipv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingontheswitchport
• DSCP remarking
• Voice VLAN
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4IGMPsnoopingportltering
• IPv6MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based/MAC-based network access
authentication
– IEEE 802.1x authentication with guest VLAN
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ users access authentication
– Guest VLAN assigns clients to a restricted VLAN with
limited services
The fiber-optic 10GBASE-X SFP+ interfaces support triple speeds, 10GBASE-
SR/LR, 2500BASE-X and 1000BASE-SX/LX, meaning the administrator now can
exiblychoosethesuitableSFP/SFP+transceiveraccordingtothetransmission
distanceorthetransmissionspeedrequiredtoextendthenetworkefciently.The
TSN-6325-8T4S4X provides broad bandwidth and powerful processing capacity.
Redundant Ring, Fast Recovery for Critical Network Applications
The TSN-6325-8T4S4X supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advancedITU-TG.8032ERPS(EthernetRingProtection
Switching)technology, Spanning Tree Protocol (802.1s MSTP), and redundant
power input system into customer’s industrial automation network to enhance
system reliability and uptime in harsh factory environments. In a simple ring
network, the recovery time of data link can be as fast as 10ms.
ERPS Ring for Data Transmission Redundancy
10GBASE-SR/LR Fiber Optic
10G
1000BASE-T UTP
1000BASE-SX/LX Fiber Optic
1000
TSN-6325-8T4S4X
ISP/Telecom
10G
10G
1000
10G
5G NR Base Station
TSN-6325-8T4S4X
TSN-6325-8T4S4X
5G NR Base Station
Layer 3 Routing Support
The TSN-6325-8T4S4X enables the administrator to conveniently boost network
efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, the
RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings
automatically.
The RIP can employ the hop count as a routing metric and prevent routing loops
by implementing a limit on the number of hops allowed in a path from the source
to a destination.
The OSPF is an interior dynamic routing protocol for autonomous system based
on link state. The protocol creates a database for link state by exchanging link
states among Layer 3 switches, and then uses the Shortest Path First algorithm
to generate a route table based on that database.
Robust Layer 2 Features
The TSN-6325-8T4S4X can be programmed for advanced Layer 2 switch
management functions such as dynamic port link aggregation, 802.1Q tagged
VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP),
Layer 2 to Layer 4 QoS, bandwidth control, IGMP snooping and MLD snooping.
Via the aggregation of supporting ports, the TSN-6325-8T4S4X allows the
operation of a high-speed trunk group that comes with multiple ports and
supports fail-over as well.