Manual
Table Of Contents
- 1. INTRODUTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main WEB PAGE
- 4.2 System
- 4.3 Simple Network Management Protocol
- 4.4 Port Management
- 4.5 Link Aggregation
- 4.6 VLAN
- 4.7 Rapid Spanning Tree Protocol
- 4.8 Quality of Service
- 4.9 Multicast
- 4.10 IEEE 802.1X Network Access Control
- 4.10.1 Understanding IEEE 802.1X Port-Based Authentication
- 4.10.2 802.1X System Configuration
- 4.10.3 802.1X and MAC-Based Authentication Port Configuration
- 4.10.4 802.1X Port Status
- 4.10.5 802.1X and MAC-Based Authentication Statistics
- 4.10.6 Windows Platform RADIUS Server Configuration
- 4.10.7 802.1X Client Configuration
- 4.11 Access Control Lists
- 4.12 Address Table
- 4.13 Port Security (To be Continued)
- 4.14 LLDP
- 4.15 Network Diagnastics
- 4.16 Stacking – SGSW-24040 / SGSW-24040R
- 4.17 Power over Ethernet (SGSW-24040P / SGSW-24040P4)
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 6.1 System Command
- 6.2 Port Management Command
- 6.3 Link Aggregation Command
- 6.4 VLAN Configuration Command
- 6.5 Spanning Tree Protocol Command
- 6.6 Multicast Configuration Command
- 6.7 Quality of Service Command
- 6.8 802.1x Port Access Control Command
- 6.9 Access Control List Command
- 6.10 MAC Address Table Command
- 6.11 LLDP Command
- 6.12 Stack Management Command
- 6.13 Power over Ethernet Command
- 7. SWITCH OPERATION
- 8. POWER OVER ETHERNET OVERVIEW
- 9. TROUBLE SHOOTING
- APPENDEX A
- APPENDEX B : GLOSSARY
User’s Manual of WGSW-24040 Series
SGSW-24040/24240 Series
168
TCP parameters will appear. These fields are explained later in this help file.
• IP Protocol Value
When "Specific" is selected for the IP protocol value, you can enter a specific
value.. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
• IP TTL
Specify the Time-to-Live settings for this ACE.
• zero: IPv4 frames with a Time-to-Live field greater than zero must not be able
to match this entry.
• non-zero: IPv4 frames with a Time-to-Live field greater than zero must be
able to match this entry.
• Any: Any value is allowed ("don't-care").
• IP Fragment
Specify the fragment offset settings for this ACE. This involves the settings for the
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an
IPv4 frame.
• No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater
than zero must not be able to match this entry.
• Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater
than zero must be able to match this entry.
• Any: Any value is allowed ("don't-care").
• IP Option
Specify the options flag setting for this ACE.
• No: IPv4 frames where the options flag is set must not be able to match this
entry.
• Yes: IPv4 frames where the options flag is set must be able to match this
entry.
• Any: Any value is allowed ("don't-care").
• SIP Filter
Specify the source IP filter for this ACE.
• Any: No source IP filter is specified. (Source IP filter is "don't-care".)
• Host: Source IP filter is set to Host. Specify the source IP address in the SIP
Address field that appears.
• Network: Source IP filter is set to Network. Specify the source IP address and
source IP mask in the SIP Address and SIP Mask fields that appear.
• SIP Address
When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
• SIP Mask
When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
• DIP Filter
Specify the destination IP filter for this ACE.
• Any: No destination IP filter is specified. (Destination IP filter is "don't-care".)
• Host: Destination IP filter is set to Host. Specify the destination IP address in
the DIP Address field that appears.
• Network: Destination IP filter is set to Network. Specify the destination IP